brcp www.vishay.com vishay electro-films revision: 22-jan-15 1 document number: 61106 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thin film bar mos capacitors product may not be to scale the bar capacitor is a mos capacitor designed for hybrid assemblies requiring ultra high power rating with miniature case size. features ? robust mos construction ? allows for multiple wire bonds. at the lowest values, case a will accept 7 bonds and case b will accept 15. ? low d, high q ? excellent load life stability applications ? hybrid assemblies ? low pass lc, rc, or lrc lumped filter ? rf blocking on dc feeds ? impedance matching ? sic or gan high frequency / high power applications note (1) see table case size value and tolerance. wv (dc) values and tolerances capacitor model a b unit case size 1204 2404 capacitance values 5 to 50 10 to 100 pf tolerance 5 5 % dc working voltage 100 100 v standard electrical specifications parameter value unit capacitance range 5 to 100 pf absolute tolerance, 1 khz (1) down to 5 % absolute tcc, -55 to 125 c 50 ppm/c operating temperatur e range -55 to +150 c operating voltage 100 max. v dissipation factor , 1 mhz 0.01 max. absolute value stability, 1 khz, 1000 h, 70 c, 100 v dc 0.25 % short time overload, 2 x rate d voltage, 25 c, 5 s 0.25 % thermal shock, mil-std-202, method 107 f 0.25 % moisture resistan ce, mil-std-202, method 106* 0.25 % high temperature exposure, 100 h, 150 c 0.25 % low temperature operation, -65 c, 45 min, 100 v dc 0.25 %
brcp www.vishay.com vishay electro-films revision: 22-jan-15 2 document number: 61106 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 mechanical specifications parameter value chip substrate material silicon dielectric silicon dioxide top termination au 1 m min. case size see table case size value and tolerance passivation none number of pads 1 back termination (epoxy only) tiw/au case size value and tolerance nominal value (pf) case type a case type b best tolerance ( %) max. operating voltage (v) 5 + - 10 100 7.5 + - 7 100 10 + + 5 100 12.5 + + 5 100 15 + + 5 100 17.5 + - 5 100 20 + + 5 100 22.5 + - 5 100 25 + + 5 100 27.5 + - 5 100 30 + + 5 100 32.5 + - 5 100 35 + + 5 100 37.5 + - 5 100 40 + + 5 100 42.5 + - 5 100 45 + + 5 100 47.5 + - 5 100 50 + + 5 100 55 - + 5 100 60 - + 5 100 65 - + 5 100 70 - + 5 100 75 - + 5 100 80 - + 5 100 85 - + 5 100 90 - + 5 100 95 - + 5 100 100 - + 5 100
brcp www.vishay.com vishay electro-films revision: 22-jan-15 3 document number: 61106 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 case size a 0.12" x 0.035" a b c d e f g h i j k l m n o p s r t u 5 pf 6.5 pf 7.5 pf 10 pf 12.5 pf 15 pf 17.5 pf 20 pf 22.5 pf 25 pf 27.5 pf 30 pf 32.5 pf 35 pf 37.5 pf 40 pf 42.5 pf 45 pf 47.5 pf 50 pf
brcp www.vishay.com vishay electro-films revision: 22-jan-15 4 document number: 61106 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 case size b 0.24" x 0.035" a b c d e f g h i j k l m n o p r s t u 10 pf 13 pf 15 pf 20 pf 25 pf 30 pf 35 pf 40 pf 45 pf 50 pf 55 pf 60 pf 65 pf 70 pf 75 pf 80 pf 85 pf 90 pf 95 pf 100 pf
brcp www.vishay.com vishay electro-films revision: 22-jan-15 5 document number: 61106 for technical questions, contact: efi@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 global part number information global part number: brcpa1000bkgcst ? global part number description: brcp 3 mm 10 pf 10 % au c st model size capacitance (pf) capacitance multiplier code tolerance code termination visual class packaging code brcp bar capacitor a = 3 mm x 1 mm b = 6 mm x 1 mm first 4 digits are significant figures of capacitance c = 0.001 b = 0.01 a = 0.1 j = 5 % k = 10 % m = 20 % l = 25 % g = au a = al c = commerical e = electrical test only h = class h k = class k ws = waffle pack 100 min., 1 mult fw = full wafer hw = half wafer st = diced on tape 000bk a p c 1 gc st r b
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
